| Homepage | Contact us | Products | Technology | News | About us |    
|
|
CDS700 full touch, introduced at the FAKUMA 2009 At the FAKUMA 2009 Stork Plastics Machinery B.V. will introduce the new CDS700 ( Full-Touch ) control system. This new controller is the successor of the CDS600 touch and is equipped with a 19 inch TFT touch screen. Complete operation of the machine is done by means of this new touch screen. New possibilities As a specialist in fast cycling injection moulding machines Stork Plastics Machinery B.V. is continuously looking for possible improvements which will increase the ease of operation. The new Full-Touch control enables a more flexible way of configurating the manual control buttons and gives opening to an improvement of the presentation on the operator panel. The manual control buttons can be arranged in an optimal way. Also the signals to the operator can become better, because all functions can be programmed visualized on screen. 
A familiar appearance A 19 inch TFT screen is placed in portrait, i.e. vertical. The upper portion of the screen remains unchanged. The new 19-inch TFT screen is as wide as the current 15 inch screen and the setup pages are identical. On the lower screen area extra buttons are placed to select the main menu pages. Further down the manual operation buttons are visualized. On the CDS600 4 columns of 8 manual buttons were arranged. The real buttons are now replaced by touch buttons. The touch buttons contain clear pictograms indicating the specific function where they are used for. At the bottom of the screen the start and stop buttons for the main motor are placed. The new Full-Touch control allows simple positioning of extra buttons for extensions such as 2K injection units. There is enough space for 5 columns of 8 buttons to be placed. In this way the operation of a 2nd injection unit becomes simple and intuitive. 
The State of the art Besides the exterior, the interior of the system has also been renewed. The heart is formed by an embedded PC with an energy saving ATOM 1.6 GHz processor. The speed of the new computer is twice as fast as the previous model. Cooling fans are not needed, because of the low operating temperatures. The electronic control of the machine is done as before, using the real-time Ethernet field bus at 100Mbit. Naturally the CDS700 is standard equipped with the remote service facility (RMS) via the Internet. As of the FAKUMA 2009 the new CDS700 Full Touch control will be sold standard on all Stork machines. The FAKUMA At the FAKUMA Stork Plastics Machinery shows a STORK S+ 2500-1450 machine with hybrid drive and the new CDS700 control. The STORK machines distinguish themselves by their extremely fast and smooth movements at a low energy consumption level. The machine responds accurately and precisely to the settings made in the control system. By default, the machine features digital closed loops that optimal control the movements. The STORK S+ machine is equipped with ECO mode, so energy consumption can be optimized even more. The machine will be shown within an automated production cell. The installation will produce a 0.6 liter container with a 2 cavity mould and with an in-mold label (IML). The cycle time will be as low as 3.5 seconds. The IML system and automation for the removal and stacking of the products will be supplied by Van den Brink Moulds and Automation (De Harskamp NL). The FAKUMA fair in Friedrichshafen Germany will held from the 13th till 17th October 2009. Come visit us at the FAKUMA, in Hall 1 stand 1211. News items: 01-06-2010 The right machine for every task! 23-09-2009 CDS700 full touch, introduced at the FAKUMA 2009 01-09-2009 WALLBOX introduces a new plastics packaging concept 01-01-2009 2K injection moulding solutions 01-10-2008 Stork Plastics Machinery at the FAKUMA 2008 01-09-2008 Remote Machine Service : an update 01-09-2008 HX: The optimum drive for the STORK S+ machine 03-03-2008 Stork Plastics Machinery B.V. appoints new UK Sales Manager. 01-03-2008 Stork Plastics Machinery : Events in 2008 05-02-2008 SPM starts with local sales in North America 01-10-2007 Stork at the K2007 trade fair. 01-10-2007 K2007 : presentation STORK S 1500 - 850 machine. 01-10-2007 K2007 : presentation STORK S 4400 - 5650-65 EP machine 01-10-2007 K2007 : presentation STORK S+ 6600 - 8650 R machine 01-09-2007 Stork introduces new range of injection moulding machines. 20-12-2006 New control technology for CDS600 20-12-2006 Stork Remote Machine Service 20-12-2006 Stork Plastics Machinery B.V. Celebrates Opening of New Premises 01-09-2006 New user interface introduced at FAKUMA 2006 10-08-2006 Program of the Open House at Stork Plastics Machinery B.V. 01-08-2006 Much more than a change of address 01-08-2006 New lease of life for HK-Plastics 01-08-2006 The optimum drive 01-02-2006 Stork N 18000 - 31500 : custom made for Jelenia plast Poland 01-02-2006 Stork Plastics Machinery : Events in 2006 Back... |
|
Remark : This site is designed for MSIE 5.5 or higher browsers, Firefox 1.0 or Netscape 6 browsers. Your browser appears to be not one of them. We appologise if our site is not working correctly with your browser. Please upgrade your browser to a newer version. |
Print page
|
© 2010 Stork Plastics Machinery | Disclaimer |
|
|
Stork Plastics Machinery B.V. has it's own philosophy and strategy.
This results in innovative injection moulding machine designs which differ from any other manufacturer.
Our machines are leading in speed , reliability, and low energy consumption.
Stork started with a licence from the Reed corp. USA.
Over the years Stork has introduced the following machine ranges: TD, TDS, ST, SX, SXS.
Currently Stork delivers the STORK N and STORK S+ series.
Stork Plastics Machinery is ISO 9001:2000 certified. This ensures the highest quality standards,
a constant and high quality in design and service organisation.
Stork excells in cooperation.
Companies like Van den Velde Engineering, Loomans Plastics, Van den Brink,
Suhling, Ronetic, Pierik, Wittmann, Reis, can verify this.
Customers like Polimoon, Jokey, Schoeller Arcor Systems, Superfos, Vadeal, Didak, HK, Dijkstra Plastics, Thrace
have experienced this.
Stork Plastics Machinery can deliver machines in the following clamping forces:
75 ton, 100 ton, 110 ton, 120 ton, 125 ton, 130 ton, 140 ton, 150 ton, 160 ton,
170 ton, 175 ton, 180 ton, 190 ton, 200 ton, 250 ton, 300 ton, 330 ton, 350 ton, 400 ton,
440 ton, 450 ton, 500 ton, 550 ton, 600 ton, 650 ton, 660 ton, 700 ton, 750 ton, 800 ton, 900 ton,
1000 ton, 1100 ton, 1200 ton, 1300 ton, 1400 ton, 1500 ton, 1600 ton, 1700 ton, 1800 ton, 1900 ton,
2000 ton, 2200 ton, 2400 ton, 2800 ton, 3000 ton.
|